Supernal 3 Bed Assembly Guide – Step-by-Step Instructions Congratulations on your purchase of the Transfer Master Supernal 3 Recliner Bed! Designed for comfort, independence, and style, this premium bed is built with over 20 years of expertise in specialty bedding. Unboxing & Preparation ? The Supernal 3 Hi/Low Bed arrives in two boxes – one for the Hi/Low unit and one for the bed deck. ? Check all components for any shipping damage before starting assembly. Contact Customer Service at 770-368-4700 if needed. Assembly Steps ✅ Attaching the Hi/Low Unit to the Bed Deck Carefully lift and flip the Hi/Low unit over the bed deck, aligning with pre-drilled holes. Connect the arms for the backrest lifting mechanism and secure with washers and bolts using a hex key. ✅ Connecting the Hi/Low Motor to the Control Box Unscrew the cap on the control box using a Phillips-head screwdriver. Plug in the Hi/Low motor cable (1 cable for Twin, 2 cables for Full/Queen). Secure the connection by screwing the cap back on. ✅ Installing the Mattress Retainer Bar Located zip-tied to the bed deck during delivery. Insert and secure using the provided pin (1 retainer bar for Twin, 2 for Full/Queen). ✅ Hand Pendant Operation All bed functions are controlled by the remote control hand pendant. Remove the plastic battery protector before first use. ✅ Emergency Lowering Feature In case of a power outage, use the battery pack under the footrest to lower the bed. Replace the two 9V batteries annually or after each emergency use. Additional Installation Steps ? Bed Rails & Headboard – Align with pre-drilled holes and secure using washers and bolts. ? Caster Installation – Use an M10 wrench & Phillips-head screwdriver to install the wheels for mobility. Troubleshooting & Support ? Refer to the owner’s manual for troubleshooting or call Customer Service at 770-368-4700. Your Supernal 3 Bed is now ready to use! Enjoy enhanced comfort and independence with this premium adjustable bed. For more details, visit www.transfermaster.com.